Home › How to apply
How to apply for an Efficiency Maine rebate
Most rebates that go wrong go wrong before the work starts: the wrong equipment, income not verified in time, or a missed deadline. Pick your project and we'll show only the steps that apply to you.
-
Check you qualify, before you buy
- The home is in Maine: a single-family house, a duplex, a condo, or a building with one or two homes and no commercial electric meter.
- It's your principal residence and you own it (required for the low- and moderate-income amounts).
- The heat pump will be your main heating system all winter. You'll initial this on the claim form.
- The home did not have a natural gas account before the upgrade.
- The exact model is on Efficiency Maine's list of rebate-eligible heat pumps. Ask your installer to confirm it in writing. Dual-fuel systems don't qualify.
- Ducted systems: sized for at least 100% of the home's heat load, and all forced hot air furnaces are removed as part of the job.
- Wall units: sized together for at least 80% of the home's heat load (100% with other heat). Your furnace or boiler can stay, but only as emergency backup. Each outdoor unit counts separately: single-zone units qualify, multi-zone units don't.
- First heat pump in a low-income home? A separate $3,000 rebate for one single-zone unit may fit better. The installer files that one and can reserve it before work starts.
- The space being insulated is heated all winter, and the job isn't part of building a new home or addition.
- Existing insulation must be thin. An area only qualifies if what's there now is about R-21 or less in the attic, or R-5 or less in walls and basements. Already-insulated areas get no rebate.
- Each area (attic, walls, basement) must be at least 250 sq ft; 500+ sq ft gets the larger rebate. Installing fiberglass batts doesn't qualify.
- The boiler or furnace is rated at least 70% efficient (HHV). The rebate is a third of the project cost, up to $6,000, one per home for life.
-
Verify your income first
The higher rebates need Efficiency Maine to verify your income before the claim is sent, or the claim can be delayed or paid at the lower amount. Do it before you sign a contract.
- Fill in Efficiency Maine's online income verification form. Answers take about 5 business days and stay valid for one year.
- Low income: pick the benefit you receive (MaineCare, HEAP, SNAP or TANF) and sign the authorization so the state can confirm it.
- Moderate income: upload your 2025 IRS Tax Return Transcript (from irs.gov) and your property tax bill or assessment.
- By filling in the form you let Efficiency Maine share your verified status with a contractor already working on your project.
-
Pick a registered installer and get quotes
- Only an Efficiency Maine Residential Registered Vendor can do work that gets the rebate. Find registered installers near you, and get at least three quotes.
- Ask each one: Will you fill out the claim form with me? Is this model on the rebate-eligible list? What rebate amount are you counting on?
- Ask for the heat load calculation and sizing; it goes on the claim form's sizing worksheet.
- Ask whether they'll do a blower-door test before and after. It's required unless there's a safety reason not to, a wood stove is running, or repairs are under way.
- Need financing? Efficiency Maine's Home Energy Loan (up to $25,000) must be approved before work starts, since it can't cover finished projects. The money goes straight to your installer.
-
After the work: fill out the claim form together
Use the right form. Both you and the installer sign it.
- Residential Ducted Heat Pump Rebate Claim Form (PDF)
- Residential Heat Pump Rebate Claim Form (PDF), for wall units
- Low-Income Supplemental Heat Pump Claim Form (PDF), only for the $3,000 single-unit rebate. The installer files it and is paid directly.
- Residential Weatherization Rebate Claim Form (PDF), for work finished on or after October 1, 2026
- Biomass Heating Systems Rebate Claim Form (PDF)
Attach
- The installer's invoice or contract showing your contact information and the total project cost.
- The completed sizing worksheet (page 2 of the form).
- The completed Weatherization Requirements Checklist, plus blower-door results written on the form.
- The invoice showing the full model number, the manufacturer and the installation cost before the rebate.
- A W-9, only if a business owns the home and the business is getting the rebate.
Choose who gets the check
Tick Homeowner to have the check mailed to you, or Registered Vendor if your installer is taking the rebate off your bill.
Low-income rebates are always sent to the installer, so ask how the rebate will show up on your bill before you sign.
-
Send it within six months
- Email it to hesp@efficiencymaine.com or mail it to Efficiency Maine, PO Box 219, Brunswick, ME 04011-0219.
- The low-income $3,000 single-unit claim goes to Lii@efficiencymaine.com instead.
- It must be emailed or postmarked within six months of the project completion date.
- $500 bonus: the work must be finished and the claim emailed or postmarked by December 31, 2026. Not available for single-wide mobile homes.
-
Wait about six weeks
Efficiency Maine asks you to allow six weeks. It may call to schedule an inspection, which you agreed to when you signed. Missing information is the most common cause of delays. Questions go to Efficiency Maine at 866-376-2463.